All China Mobile Secret Codes

default user code: 1122, 3344, 1234, 5678

Engineer mode: *#110*01#Factory mode: *#987#Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200Restore factory settings: *#987*99#LCD contrast: *#369#software version: *#800#software version: *#900#set default language: *#0000# Sendset English language: *#0044# Sendset English language (new firmware): *#001# SendMore some codes for reset mobile china*#77218114#*#881188#*#94267357#*#9426*357#*#19912006#*#118811#*#3646633#

i-phone secret codes!
Here are some more secret iPhone codes for you to enjoy. After realizing that the
*3001#12345#* was a familiar Nokia code, I decided to spend some time googling for other phone
codes that might work on the iPhone.
These (mostly) do. There are more. Feel free to add your own to the comments.
*3001#12345#* and tap Call. Enter Field Mode.Field mode reveals many of the inner settings of
your iPhone, specifically up-to-date network and cell information.
*#06# Displays your IMEI. No need to tap Call.IMEI is the unique identifier for your cell
phone hardware. Together with your SIM information it identifies you to the provider network.
*777# and tap Call. Account balance for prepaid iPhone.
*225# and tap Call. Bill Balance. (Postpaid only)
*646# and tap Call. Check minutes. (Postpaid only)These three are pretty self explanatory.
*#21# and tap Call. Setting interrogation for call forwards.Discover the settings for your
call forwarding. You'll see whether you have voice, data, fax, sms, sync, async, packet
access, and pad access call forwarding enabled or disabled.
*#30# and tap Call. Calling line presentation check.This displays whether you have enabled or
disabled the presentation of the calling line, presumably the number of the party placing the
call.*#76# and tap Call. Check whether the connected line presentation is enabled or not.State
whether the connected line presentation is enabled or disabled. Presumably similar to the
calling line presentation.
*#43# and tap Call. Determine if call waiting is enabled.Displays call waiting status for
voice, data, fax, sms, sync data, async data, packet access and pad access. Each item is
either enabled or disabled.
*#61# and tap Call. Check the number for unanswered calls.Show the number for voice call
forwarding when a call is unanswered. Also show the options for data, fax, sms, sync, async,
packet access and pad access.
*#62# and tap Call. Check the number for call forwarding if no service is available.Just like
the previous, except for no-service rather than no-answer situations.
*#67# and tap Call. Check the number for call forwarding when the iPhone is busy.And again,
but for when the iPhone is busy.
*#33# and tap Call. Check for call control bars.Check all the usual suspects (voice, data,
fax, sms, etc) to see whether barring is enabled or disabled for outgoing.china phone code

*#66*# Set Factory Mode CONFIRMED*#8375# Show Software Version CONFIRMED*#1234# A2DP ACP Mode CONFIRMED*#1234# A2DP INT Mode CONFIRMED*#0000# + Send : Set Default Language CONFIRMED*#0007# + Send : Set Language to Russian CONFIRMED*#0033# + Send : Set Language to French CONFIRMED*#0034# + Send : Set Language to S*****h CONFIRMED*#0039# + Send : Set Language to Italian CONFIRMED*#0044# + Send : Set Language to English CONFIRMED*#0049# + Send : Set Language to German CONFIRMED*#0066# + Send : Set Language to Thai CONFIRMED*#0084# + Send : Set Language to Vietnamese CONFIRMED*#0966# + Send : Set Language to Arabic CONFIRMED

Service codes Samsung:
E900 software version: *#5002*8376263#E900 full reset: *2767*3855#Service codes Spice:S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200S410 engineer mode: *#3646633#S900 software version: *#8375#S900 serial no: *#33778#Service codes Philips:S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200Service codes "Chinese" models:default user code: 1122, 3344, 1234, 5678Engineer mode: *#110*01#Factory mode: *#987#Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200Restore factory settings: *#987*99#LCD contrast: *#369#software version: *#800#software version: *#900#Service codes BenQ:software version: *#300#test mode: *#302*20040615#Service codes Pantech:software version: *01763*79837#service menu: *01763*476#reset defaults (phone/user code reset to default): *01763*737381#
Service codes VK-Mobile 3xx, 5xx:
software version: *#79#software version: *#837#service menu: *#85*364# (hold #)Service codes VK200, VK2000, VK2010, VK2020, VK4000:software version: *#79#service menu: *#9998*8336# (hold #)reset defaults (phone/user code reset to default): *#9998*7328# (hold #)Service codes LG:software version: 2945#*#KG300 NVRAM format: 2945#*# -> menu 15Service codes Sony-Ericsson:J100 software version: #82#Service codes Fly:M100 software version: ####0000#2040(i) reset defaults: *#987*99# SendMX200 reset defaults: *#987*99# SendMX200 software version: *#900# SendSL300m reset defaults: *#987*99# SendSL300m software version: *#900# SendSL500m reset defaults: *#987*99# SendSL500m software version: *#900# SendMP500 reset defaults: *#987*99# SendMP500 software version: *#900# SendSet language to English: *#0044#Set language to Russian: *#0007#Service codes Konka:C926 software version: *320# SendC926 set default language: *#0000# SendC926 set English language: *#0044# SendService codes GStar:GM208 (Chinese Nokea 6230+) engineering menu: *#66*#Set language to English: *#0044#Set language to Russian: *#0007#Service codes Motorola:Motofone F3 software version: **9999* SendC113, C114, C115, C115i, C116, C117, C118 software version: #02#*C138, C139, C140 software version: #02#*C155, C156, C157 software version: #02#*C257, C261 software version: #02#*V171, V172, V173 software version: #02#*V175, V176, V176 software version: #02#*C168, W220 software version: *#**837#W208, W375 software version: #02#*E900 software version: *#5002*8376263#E900 full reset: *2767*3855#Service codes Spice:S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200S410 engineer mode: *#3646633#S900 software version: *#8375#S900 serial no: *#33778#Service codes Philips:S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200